Industrial Machinery

KraussMaffei Extrusion introduces single-stage PVC InlineMixing for roofing membranes

The company says the continuous route removes separate hot-cold mixing and can cut energy use, speed formulation changes and reduce footprint.

Mateo AlvarezNovember 17, 20265 min read0 views
A conceptual illustration of a continuous PVC roofing-membrane line, with feeders, a twin-screw extruder and calender rolls shown as one compact production flow.

KraussMaffei Extrusion has developed a continuous single-stage process, called PVC InlineMixing, for making PVC roofing membranes, replacing the conventional two-stage route that begins with a separate hot-cold mixing step. The company says the new approach can lower energy costs, shorten production time and support a rapid return on investment, while giving manufacturers more flexibility to change formulations.

In the traditional process, PVC powder, plasticizers, additives and fillers are processed batchwise in a hot-cold mixer combination to create a dryblend. The material is then cooled, stored and later plasticized in a twin-screw extruder before being formed into membranes. PVC InlineMixing removes the separate mixing stage: all solid and liquid components are fed directly into the extruder through gravimetric dosing systems in the required proportions.

Cost and operating effects

KraussMaffei says the single-stage route avoids investment in a separate heating-cooling-mixing combination and heats the material only once. Depending on the formulation, system parameters and location, energy consumption and related costs can fall by up to 75%, according to the company. Removing the separate mixer also reduces the space needed for the full system and lowers labor requirements. KraussMaffei says maintenance costs are lower as well because wear parts for the heating-cooling mixer are no longer required. The company links the lower capital expenditure and operating costs to improved overall cost-effectiveness and the conditions for a quick payback.

The process also changes how formulation adjustments are handled. KraussMaffei says formula and color changes can be made directly during operation through the integrated control system, avoiding the preparation and interim storage of separate dryblend batches. Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, says this gives roofing-membrane manufacturers a competitive advantage through lower production costs, greater flexibility and more efficient manufacturing. In his account, they can respond faster to new requirements, adjust formulations during production and reduce energy and capital expenditure.

Development and validation

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated using industrial roofing-membrane formulations. The work used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components. The ZE BluePower series has a Da/Di ratio of 1.65; KraussMaffei says the combination of high torque and large free volume creates a wide process window for different formulations.

According to the company, the tests confirmed excellent gelation levels for the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements across several formulations. Bartel says the results demonstrate the potential of PVC InlineMixing for industrial roofing-membrane production, and that customers can test their own formulations under production-relevant conditions at the Technology Center, optimize the process and prepare for industrial implementation.

Industrial reference

PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant reaches a total throughput of 1,800 kg/h with two extruders and two calenders. In that line, PVC, additives and fillers, together with the resulting edge trimmings, are continuously processed directly into finished membranes. KraussMaffei presents the process as a way to combine high product quality with a leaner production route, yielding more cost-effective and flexible membrane manufacturing.