SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor built for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The device uses an expanded laser spot with optical triangulation and joins the company's SGI Series portfolio, aimed at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering where micrometre-level readings are required.
Why the spot size matters
Conventional point-spot sensors concentrate reflected laser energy on a small area, the company notes, leaving readings exposed to scratches, grain boundaries, brushed textures and matte finishes. Such features can create signal variations that the instrument treats as dimensional change, which may trigger false defect warnings and additional inspection. The SGI-N030W gathers reflected light over a wider patch and averages local microscopic peaks and valleys before converting the signal. According to SinceVision, this limits the influence of surface roughness and optical scattering on materials including drawn metals, sandblasted surfaces and coated battery foils.
Specified performance
- Reference distance of 30 mm with a measurement range of ±5 mm
- Repeatability of 0.05 µm on a diffuse white target under static conditions
- Linearity of ±0.02% of full scale across the range
- Sampling frequency of 50 kHz, equivalent to a 20 µs update interval
- RS485 and 100Base-TX Ethernet links, plus switchable 4–20 mA current or 0–10 V voltage analogue outputs
- Master-slave synchronisation so two heads can measure from opposite sides of a component or moving material
In-line electrode thickness
The company's lead application is thickness measurement of lithium-ion battery electrodes during production, where coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. Offline checks with contact micrometers or drop indicators can bring in operator variability and may deform wet or uncured electrode material, while periodic spot readings cannot continuously cover a full production reel. In the proposed arrangement, two synchronised sensors sit above and below the moving electrode web, mounted on a calibrated, low-thermal-expansion marble gantry. A controller combines the clearance readings from each head with the fixed mounting datum to derive the electrode's absolute thickness in real time. SinceVision reports that production trials held stable, repeatable measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate supplies high longitudinal resolution, allowing localised coating agglomerations, edge thinning and exposed substrate to be flagged before the material moves on to cell winding.
Semiconductor and assembly uses
Further targets include semiconductor manufacturing, where non-contact operation matters for sensitive wafer surfaces. Listed tasks cover wafer position verification, edge detection, height measurement, and checks on wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, the sensor is positioned to track the motion of voice coil motors, linear actuators and micro-steppers, capturing transient displacement, mechanical oscillation, settling behaviour and end-stop overshoot across the full range. Position data can be passed to machine control through the Ethernet interface for real-time monitoring.
Surface texture as an error source
Jack Li, global sales and marketing director at SinceVision, says false defect warnings caused by surface texture remain a recurring problem in battery production and precision assembly. In his account, point-beam laser sensors can read microscopic scratches and rough coatings as genuine thickness changes, which slows lines and adds manual inspection work. The wider optical spot on the SGI-N030W is designed to average out those surface-related variations, while synchronisation between opposing heads is intended to support fast thickness verification.
